1. Introduction

The KWAFOO 100W Portable Folding Solar Panel is fitted with two support legs at the rear of the solar panel
These are used to support the panel when in use and allow you to adjust the elevation (angle) of the panel as required.
Unfold the panel and face it directly towards the sun. Use the support legs to adjust the elevation so the panel is 90 degrees to the sun
This will deliver the highest power output for following using of this portable folding solar panel .

a. Charge Portable Power station like Jackary , Ecoflow , Bluetti ,Anker and other brands that with DC5521 , DC5525 , Anderson or XT60 connectors included in this Folding Solar Panel .

b. Charge small devices like Mobile phone , Ipad , Laptop etc.. by the USB power box equipped in this portable folding solar panel kit . The USB outputs are include :

1X USB-C : 5V ,9V,12V,15V,20V / 3A
1X USB-A : 5V 3A, 9V 2A , 12V 1.5A
1X USB-A : 5V 3A
 

c. Charge 12V battery via MC4 connector output .Suggest use 12V 10A solar charge controller for KWAFOO 100W foldable solar panel ,Use KWAFOO MPPT solar charge controller with better charging performance.

2. Specification

Model :	CB100W	CB200W
Peak Power (Pm)	100W	200W
Max. Power Voltage (Vm)	20.0V	20.0V
Max. Power Current (Im)	5A	10A
Open Circuit Voltage (Voc )	24.0V	24.0V
Short Circuit Current (Isc)	5.25A	10.5A
Solar Cell Type	A grade Mono Crystalline	A grade Mono Crystalline
Solar Cell Efficiency	23%	23%
Solar Panel	2X50W	4X50W
Folded Size	615X560mm	635X564mm
Open Size	1230X560mm	2390X564mm
Net Weight	4.5Kgs	8.5Kgs

KWAFOO
The most friendly way to live , the best way to achieve ..